En-Masse Chain Conveyors
GSI 12", 14", and 20"
En-Masse Chain Conveyors offer many features to
maximize performance and reduce operation costs. For larger grain
capacity requirements, GSI offers a 26" and 32" En-Masse
Conveyor. These conveyors feature an extra heavy-duty construction and
easy access to all vital hardware. All of GSI’s conveyors are highly
corrosion resistant and come standard with a powder coat finish for
lasting durability and superior appearance.
Tail Section
Extended mount flange bearings on 12” (304.8 mm) and 14” (355.6 mm)
tall chain conveyors. External mount pillow block bearings on 20”
(508mm) tall conveyors. Heavy duty chain tension take-up system
utilizing corrosion resistant acme threaded screws. Flame cut hardened
steel sprockets. Split hubs available. Maintenance friendly, bolted
access to allow removal of the shaft, sprocket, and bearings as an
assembly. 10 gauge housing on 12” and 14” conveyors, 7 gauge on 20”
conveyors. Tail shafts are turned ground and polished.
Head Section
Extended mount flange bearings on 12” (304.8 mm) and 14” (355.6 mm)
tall conveyors. External mount pillow block bearings on 20” (508 mm)
tall conveyors. Machined .25” thick UHMW shaft seals. Flame cut hardened
steel sprockets. Split hubs available. Maintenance friendly, bolted
access to allow removal of the shaft, sprocket, and bearings as an
assembly. 10 gauge housing on 12” and 14” conveyors, 7 gauge on 20”
conveyors. Head shafts are turned ground and polished.
Trough Section Features
Dust and weather tight, heavy gauge, peaked covers on head, tail and
intermediate trough. Abrasion resistant steel wear liners with recessed
fasteners for removal or replacement. Bolted removable bottom
construction. Standard 10 gauge (3.41mm) intermediate trough sides.
Trough sections are fixture assembled for accurate alignment and ease of
installation. Trough sections are flanged with structural angle to
provide rigidity and accurate alignment. Standard roller chain
engineered for each specific conveyor to maximize working load and
expected life. UHMW flights prevent steel to steel contact. UHMW return
rollers with shafts bolted to trough for easy maintenance and
replacement are standard on 12” to 14” tall conveyors. Rail returns are
standard on all 20” tall conveyors. Rails are lined with .25” abrasion
resistant steel and tapered end to end to minimize flight wear and
maximize cleaning. Rails overlap at flange connections for smooth
operation.
26" and 32" Tall En-Masse Chain Conveyors
En-Masse Chain Conveyor standard features and
options include 6” (152.4mm) pitch welded steel chain with v-cup flight
attachments and factory mounted paddles. Abrasion resistant steel wear
liners with recessed fasteners for removal or replacement. Slack chain
switch. Hinged head relief door with limit switch standard. Head and
tail housing split for shaft and sprocket removal. Standard split
sprockets
Specifications
|