Standard Bin Sweeps
Standard Bin Sweeps are available in 6" (152.4mm),
8" (203.2mm), and 10" (254mm) sizes and can be used in bins ranging in
size from 15' (4.58m) to 42' (12.8m). Torque tube and back shield adjust
for close floor clearance. Bins 30' or larger include an intermediate
bearing to help stabilize the sweep flight. Sweep augers can be removed
easily for placement into another bin of the same size.
Close Floor Clearance
The torque tube and backup shield adjust for close floor clearance so
you get maximum bin cleanup, removing grain in one or two revolutions.
On the end of the sweep, a rubber wheel supports the auger flighting and
provides traction as the sweep rotates. If your bin is 30' (9.14m) or
larger, an intermediate bearing is included to help stabilize the sweep
flighting. All our sweeps have sealed, self-aligning bearings to reduce
replacement costs. Center wells have a 1" (25.4mm) inner diameter pivot
socket. You have the option of using a 4" (101.6mm) depth extension on
the pivot stem to raise the motor above the grain during the first
stages of cleaning.
Center Well Band-On Intermediate Well Shallow Intermediate Well
Full Open Gate with Nylon Rollers
Bin Wells and Unload Tubes
The bin well with an unloading tube is an essential combination of
components in an automatic bin unloading system. With these installed, a
variety of components can be used to create the unloading system that
best fits your needs. Bin wells are priced affordable, making them a
good investment for every bin. For 15' (4.57m) to 36' (10.97m) diameter
bins, unload tubes are available in lengths from 8' (2.43m) to 18' 6"
(5.64m).
All wells and tubes are built with long lasting, durable galvanized
steel. Our bin wells work with an aeration/drying floor, preformed
trench.
We offer the full gate, concrete center, and the
band-on intermediate wells with nylon rollers.
The illustrations below show two different bin well and unloading tube installation combinations.
|